Get your product ready for the market with an accredited EMC test which tests the product for electromagnetic interference and robustness.
The level of electromagnetic noise from your product and its robustness against electromagnetic interference from other sources determines whether your product can live up to the rules concerned, and it plays a big role in your product’s functionality and success in the market.
It is therefore important to measure and document the level of your product’s radiation of electromagnetic noise and response to electromagnetic interference from other products and the environment. At DELTA, we offer accredited EMC tests for that purpose. EMC stands for Electromagnetic Compatibility and expresses the product’s ability to electromagnetically work with other electrical or electronic equipment without interference or breaking down.
With an EMC test, you get the electromagnetic radiation and robustness documented. Thus, the test is central to obtaining CE marking or other approvals. DELTA’s EMC test is internationally recognised and can be used everywhere to ensure an easier approval process.
With an accelerated EMC test you will gain a number of strategic advantages:
Clear documentation to authorities, certifying bodies and customers
More rapid CE marking or other types of approval of your product.
DELTA is accredited to carry out EMC tests, and has advanced testing facilities for this purpose. We have some of the industry’s most experienced and knowledgeable testing experts who focus on that you end up with a complete and successful result.
By collaborating with DELTA for your EMC testing, you will get:
- Accredited third-party test
- Tests which are methodologically correct
- Measurements conducted according to the standards that are relevant to your market
- Great knowledge about standards, via DELTA’s active participation in standardisation working groups, nationally as well as internationally.
- Guidance on whether any adjustments are needed to the test procedure.
- The possibility to expand the testing to include other parameters, e,g, climatic and mechanical durability.
- In addition, we offer preliminary EMC tests and do-it-yourself facilities where you can test your products yourself. You can also find relevant courses through us and become a member of the EMC Club.
DELTA offers accelerated EMC testing for a variety of electronic products and has special expertise in the following sectors:
- Building & Construction
- Consumer electronics
- Industrial electronics
- Medical devices and welfare
- Military and aerospace
- Marine and offshore
- Machinery and production equipment
- Technical audiology
- IT and telecom
- Automotive and transportation
- Wind and energy
Locations: Hørsholm and Aarhus.
Standards: CISPR 11, CISPR 22, CISPR 25, CISPR 32, EN/IEC 61000-4-2, EN/IEC 61000-4-3, EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-6, EN/IEC 61000-4-8, EN/IEC 61000-4-9, EN/IEC 61000-4-10 and a wide range of product standards such as EN60945, EN/IEC 60601-1-2.
Type: Semi-anechoic (walls and ceilings covered with absorbers, and the floor is reflective), Semi-anechoic chambers (SAC). The floor can be covered with absorbers, Full-anechoic room (FAR).
Frequency range (radiated and conducted emission): 9 kHz – 40 GHz
Dimensions (LxWxH): 20.1 x 13.0 x 8.8 m Port Dimension (WxH): 3 x 3 m
Door Dimension (WxH): 1.2 x 2.1 m
Measuring Distances (emissions): 1 m, 3 m and 10 m
Load capacity (floor): max. 10,000 kg/m2
Dimensions (diameter): 5 m
Load: max. 10,000 kg (distributed)
Hydraulic lift platform at the entrance to the SAC:
Load: max. 10,000 kg (distributed)
Frequency range: 26 MHz – 40 GHz Field strength: max. 1000 V/m (depending on the frequency range and the test method)
ESD test: Test level: ± 30 KV
Fast transient/burst: Test level: ± 4.8 KV
Surge: Test level: ± 10 KV
Frequency range: 9 kHz – 230 MHz.
Level: max. 30 V/rms or 260 mA
Magnetic field: 50/60 Hz, 1000 A/m
Power supply options: 230 VAC / 50 Hz (phase+0), 400 VAC / 50 Hz (3 phases+0) max 125 A Signal Connections: Ethernet, VGA, DVI, D-sub, USB, HDMI, CAN, RS232, VDC, VAC etc.
Other: Air, water